392 HEMI

392 HEMI V8
Engine
Manufacturer	Chrysler
aka
Type	Gasoline (Petrol)
Production/Introduction	{{{choose one then note its year of introduction/production}}}
Status	Discontinued
Displacement	392 cu-in.
Aspiration	naturally aspirated
Configuration	V
Cylinders	8
Bore	4.0000 in
Stroke	3.906 in
Compression	10.0:1
Fuel System	4V Carburator
Length
Diameter
Width
Height
Dry Weight	767 lbs.
Output	345 hp @ 4600 rpm 450 lb-ft. of torque @ 2800 rpm
Firing Order	1-8-4-3-6-5-7-2
Left Bank	1-3-5-7
Right Bank	2-4-6-8
Fuel Consumption
Carburetor
In Valves (in)	2.00
Ex Valves (in)	1.75
Chief Engineer

The original 392 HEMI engine was introduced in the new 1957 model year Chryslers and Imperials. It replaced the 354 cubic-inch version of the original HEMI launched in 1951.

Compared with the 354, the 392 was completely revised and improved, with larger valves and ports, a beefier block and crankshaft, and improved bearings. In short, the 392 HEMI, often referred to simply as the “92,” was perfect for drag racing.

More than a few racers bolted on six or eight carburetors, slipped in a hotter cam, tipped some nitro into the tank and went racing. Racing legend Don Garlits ran a 392 in his Swamp Rat I at record speeds of over 180 mph on nitro with no supercharger. Garlits also used a 392 HEMI to officially break the 200-mph barrier when his Swamp Rat went 201.34 mph at Atco, N.J. in 1964.

Criticisms

Please make sure to keep critiques in a third-person point of view. If using criticisms from a reputable automotive source, then please make sure to cite the quote.

Worldwide

If the vehicle is sold in other markets worldwide, then this is the section to mention that information. Also, mention if the <MODEL> goes by another name in these other markets.

Design quirks and oddities

Refer to any pop-culture tidbits about the vehicle in this section.

Awards

List out notable awards that the model has recieved while in production. Boldface the company or orgainization that gives out the award, and Italicize the name of the award.

External Links

Please include any external sites that were used in collaborating this data, including manufacturer sites, in this section.