Wikicars, a place to share your automotive knowledge


Revision as of 04:12, 8 February 2010 by Red marquis (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

A V10 engine is a V engine with 10 cylinders in two banks of five with a distinct exhaust note.


The V10 can be considered to be constructed by mating two even firing straight-5 engines together. The straight 5 engine shows first and second order rocking motion. Here it should be assumed that the crankshaft with low second order vibration is used and the first order is balanced by a balance shaft. By mating the straight-5 banks at 90 degrees and using 5 throws the balance shafts balance each other and become null. The firing sequence is odd (BMW M5, Dodge Viper). Using an 18° split journal crankshaft the firing order can be made even, and the two balancer shaft do not balance each other completely, but are combined into a single very small balance shaft (Lamborghini Gallardo, Ford 6.8 V10). Using a 5 throw crankshaft and 72° bank angle the firing order can be made even, and the two balancer shafts do not balance each other completely, but are combined into a single small balance shaft. A 36° degree bank angle and a 108° flying arm crankshaft would allow even firing without a balance shaft and smaller counterweights, but are impractical.

The V10 configuration is not an inherently balanced design like a straight-6 or V12 or a flat-6 or a straight-8 or a crossplane V8 (ignoring the counterweights) and does still have a small second order rocking motion, which can only be compensated by two additional balance shafts.

Road cars

Until recently, V10s had rarely been a popular configuration for road cars: a V12 is only slightly more complicated, and runs more smoothly, and a V8 is less complex and more economical. Nevertheless, modern engineering has made it possible to use V10 engines for applications where a V8 would produce insufficient power and a V12 would be too complicated or bulky.

Dodge was the first to develop a modern V10 engine, originally designing a version of its LA series small block for use in trucks. However, the engine saw its first production use in substantially revised form in the Dodge Viper. The original truck version of the engine was eventually used starting in 1994 in the Dodge Ram. It discontinued in that application after 2003. However, 2003 also saw the introduction of the Dodge Ram SRT-10, a performance model meant to rival Ford's successful F-150 SVT Lightning. The Viper engine (a 90-degree engine with odd firing order to obviate the need for a balance shaft) has been tweaked through the years, and now produces 600 hp (447 kW; 608 PS) (447 kW) in a standard state of tune from its 8.4 liter displacement. The engine is also used by Bristol, in tuned form, in their two-seat Fighter coupe, where it can produce upward of 630 hp (470 kW; 639 PS) (470 kW).

Ford also developed a heavy-duty V10 version of their Triton engine to replace the aging 460 big block in truck applications. It was introduced in the E-Series/Econoline full-size van, and also saw duty in the F-Series Super Duty line and the Ford Excursion SUV, and is still in production in 2008.

European marques were slower to adopt the V10 configuration. However, high-revving V10 powerplants were incorporated into supercars from Lamborghini and Porsche. BMW and Audi later unveiled ten-cylinder versions of their mid-range saloons (the BMW 5-Series and Audi A6 families, respectively). Interestingly, Volkswagen developed a ten-cylinder engine as well, but as a turbodiesel.

A list of post-war V10-engined production cars (sorted alphabetically by manufacturer, sub-sorted by year of introduction):


The most widespread use of the V10 has been in Formula One racing. Alfa Romeo made the first modern Formula One V10 in 1986; although it was never used in a Formula One car.<ref name="">Template:Citation/core{{#if:|}}</ref> Later the configuration was introduced by Honda and Renault before the 1989 season. The introduction of the 3.5 litre rule after turbos were outlawed made the V10 seem the best compromise between the V8 and the V12. V10 motors became common-place after the reduction from 3.5 to 3 litres, and V10 engines were exclusively used by teams from the 1998 season. Renault had a more flat 110° angle motor in 2002 and 2003, but reverted to a more conventional layout (a 72° angle) following the change in rules which dictated that an engine must last two race weekends. In a further change to the rules, V10s were banned for the 2006 season in favour of 2.4 litre V8s.

There are also cars with V10 engines in sports car racing, usually with Judd powerplants with 4 or 5 litre engines, made available for customers, although the first V10 was seen in the works Peugeot 905, in the final races of the 1990 World Sportscar Championship.

Piston engine configurations
v  d  e
Type BourkeTemplate:· Controlled combustionTemplate:· DelticTemplate:·OrbitalTemplate:· PistonTemplate:· Pistonless (Wankel)Template:· RadialTemplate:· RotaryTemplate:· SingleTemplate:· Split cycleTemplate:· StelzerTemplate:· Tschudi
Inline types H · U · Square four · VR · Opposed · X
Stroke cycles Two-stroke cycleTemplate:· Four-stroke cycleTemplate:· Six-stroke cycle
Straight Single · 2 · 3 · 4 · 5 · 6 · 8 · 10 · 12 · 14
Flat 2 · 4 · 6 · 8 · 10 · 12 · 16
V 4 · 5 · 6 · 8 · 10 · 12 · 16 · 20 · 24
W 8 · 12 · 16 · 18
Valves Cylinder head portingTemplate:· CorlissTemplate:· SlideTemplate:· ManifoldTemplate:· MultiTemplate:· PistonTemplate:· PoppetTemplate:· SleeveTemplate:· Rotary valveTemplate:· Variable valve timingTemplate:· Camless
Mechanisms CamTemplate:· Connecting rodTemplate:· CrankTemplate:· Crank substituteTemplate:· CrankshaftTemplate:· Scotch YokeTemplate:· SwashplateTemplate:· Rhombic drive
Linkages EvansTemplate:· Peaucellier–LipkinTemplate:· Sector straight-lineTemplate:· Watt's (parallel)
Other HemiTemplate:· RecuperatorTemplate:· Turbo-compounding