Triumph Stag

Triumph Stag
Triumph
aka
Production	1970-1977 25,877 Made
Class	Sports Tourer
Body Style	2-Door Coupe 2-Door Convertible
Length	173 inches (4,410mm)
Width	63.5 inches (1,610mm)
Height	49.5 inches (1,258mm)
Wheelbase	100 inches (2,540mm)
Weight	2,800 lbs (1,270 kg)
Transmission	4-speed Manual
Engine	3001 cc V-8
Power	145 hp (106.7 kW) at 5500 rpm
Similar	Triumph 2000
Designer	Giovanni Michelotti

place image here in 300 pixels
Triumph Stag
place marque here - not manufacturer
aka	Type aka here, not up there
Production	produced from when to when+total units made (optional)
Class	denote market class
Body Style	how many doors+how many seats+what type of body
Length	length - type here
Width	Width - type here
Height	Height - type here
Wheelbase	wheelbase - type here
Weight	Weight - you get the point
Transmission	transmission + drive
Engine	engine
Power	N/A hp @ N/A rpm N/A lb-ft of torque @ N/A rpm
Similar	similar (competition)
Designer	Designer (lead designer if it was a team effort)

The Triumph Stag was a British car sold between 1970 and 1978 by the Triumph Motor Company, which featured styling by the Italian designer Giovanni Michelotti.

See Wikicars' comprehensive Triumph Stag Review.

Recent Changes

Mention any minor facelifts or major changes made to the vehicle here.

Styles and Major Options

Certain vehicles come in different trim levels or body styles. Features and major options should be mentioned here.

Pricing

Add more fields as necessary.

MODEL Trims
Trim1	Trim2	Trim3	Trim4
MSRP
$Price1	$Price2	$Price3	$Price4
Invoice
$Price1	$Price2	$Price3	$Price4

Gas Mileage

Add more fields as necessary.

As seen on the FuelEconomy.gov website, the City/Highway MPG averages are as follows:

Trim
Trim1	Trim2	Trim3	Trim4
MPG
c/h	c/h	c/h	c/h

Engine and Transmission

Specifications, details, graphs, pictures and other information regarding the powertrain is placed in this section.

Performance

Please make sure to write information of the vehicle's performance in a third-person point of view. This section should include information about the car's acceleration figures, handling, braking, etc.

If using information gathered from Road Test articles from a reputable automotive source, then please make sure to cite the quote.

Reliability

Warranty options and scheduled maintainance information should be mentioned here.

Safety

This section should reference points on safety ratings and features of the vehicle.

Photos

Add Photos of the vehicle here.

Please make sure not to use copyrighted photos.

Colors

List the colors that the particular <MODEL> is offered in.

Main Competitors

Create links to other <MAKE> <MODEL> pages in this section.

Hybrid Models

If there are hybrid versions of this vehicle manufactured, then please elaborate a little bit on it here.

Unique Attributes

If there are any features of this vehicle that sets it apart from other vehicles in its class, then mention those unique attributes here.

Interior

This section should include information on the interior's design, build quality, ergonomics, space (head and legroom, front and rear), features, stowage compartments and overall comfortability and livability. Add pictures wherever applicable and keep information in a third-person point of view.

Resale Values

Add more fields as necessary.

<MODEL> Year
Year X	Year X-2	Year X-3	Year X-4
Resale Value
$	$	$	$

Criticisms

Please make sure to keep critiques in a third-person point of view. If using criticisms from a reputable automotive source, then please make sure to cite the quote.

Generations

Fill in as many as appropriate. Add more if necessary and pictures wherever applicable.

Please make sure NOT to use copyrighted pictures.

Worldwide

If the vehicle is sold in other markets worldwide, then this is the section to mention that information. Also, mention if the <MODEL> goes by another name in these other markets.

Design quirks and oddities

Refer to any pop-culture tidbits about the vehicle in this section.

Awards

List out notable awards that the model has recieved while in production. Boldface the company or organization that gives out the award, and Italicize the name of the award.

External Links

Please include any external sites that were used in collaborating this data, including manufacturer sites, in this section.

News and References

Enthusiast Sites and Discussion Forums

• The Triumph Stag Web Site & Registry
• Triumph Stag Owners Club - UK
• Triumph Stag Club USA
• Triumph Stag photo

Design and Styling

Envisioned as a luxury sports car, the Triumph Stag was designed to be a gentleman's sports tourer, to compete directly with the Mercedes-Benz SL class models. All Stags were four-seater convertible coupés; for structural rigidity, the Stag required a B-pillar "roll bar" hoop connected to the windscreen frame by a T-bar. A removable hardtop was a popular factory option for the early Stags, and was later supplied as a standard fitment.

The car started as a styling experiment literally cut and shaped from a 1963-4 Triumph 2000 pre-production saloon, which had also been styled by Michelotti, and loaned to him by Harry Webster, Director of Triumph Engineering from the early to late 1960's. Their agreement was under the premise that if Harry liked the design, Triumph could use the prototype as the basis of a new Triumph model. Harry, who was a long time friend of Giovanni who he called "Micho", absolutely loved the design and spirited the prototype back to England. The end result, a two door drop head (convertible) had little in common with the styling of its progenitor 2000, but retained the suspension and drive line. Triumph liked the Michelotti design so much that they propagated the styling lines of the Stag into the new T2000/T2500 saloon and estate model lines of the 1970's.

Engineering

It has been alleged that internal politics meant that Triumph intended, but were unable, to use the proven but old technology General Motors designed all aluminium Rover V8. This is myth. Rover, also owned by British Leyland, simply could not supply the numbers of aluminium V8 engines to match the anticipated production of the Stag. Besides, Harry Webster had already started development and testing of a new unique, all Triumph designed overhead cam (OHC) 2.5 litre fuel injected (PI) V8 to be used in the Stag, large saloons and estate cars. The vision was to allow Triumph to compete in the highly desired V8 marketplace. Under the direction of Harry's replacement, Spen King in 1968, the new Triumph OHC 2.5 PI V8 was enlarged to 2997 cc (3.0 litre) to increase torque and the troublesome fuel injection dropped in favour of dual Zenith-Stromberg 175 CDSE carburetors to meet emission standards of the target market - USA.

The Triumph Slant-4 engine shared the same basic design as the Triumph V8, consisting of a single overhead cam cast iron block with aluminium heads. However the cylinder heads of the two engines do not share the same footprint on their respective engine blocks. This same Triumph Slant-4 engine manufactured by StanPart was initially used in the Saab 99. Using a gear driven water pump, the Slant 4 could be easily installed in a front wheel drive car. This same water pump design was used in the Stag V8.

As in the Triumph 2000 model line, monocoque construction was employed, as was fully independent suspension—MacPherson struts in front, semi-trailing arms at the rear. Braking was by front disc and rear drum brakes, while steering was power-assisted rack and pinion.

Production

The car was launched one year late in 1970, to a fairly warm welcome at the various international auto shows, which soon turned sour after delivery to the market with reports of engine problems. Some of these were due to the perennial problem of poor build quality, endemic to the British motor industry of the time, while others related to what some feel were the fatal design problems in the engine. These included:

• long simplex roller link chains combined with inedaquate engine maintenance and factory specified 7500 mile oil change intervals. The chains could last less than 25,000 miles resulting in expensive damage when they failed;
• inadequately sized main bearings in the early OHC 2.5 litre V8 design with short lives, changed in the 3.0 litre design;
• aluminium head warpage due to poor castings, head gaskets which restricted coolant, leading to overheating;
• water pump failures relating to poor drive gear hardening, prematurely wearing out the gear and stopping the water pump.

British Leyland never provided sufficient budget to correct the few design issues of the Triumph 3.0 litre OHC V8. Many owners adopted a popular conversion of the car fitting a Rover V8, Ford Capri 2.8 V6 or Triumph 6-cylinder engine but now such conversions fetch lower prices than a genuine Stag V8-engined car.

Perhaps thanks to such a reputation for trouble, only 25,877 cars were produced between 1970 and 1977. Of this number, 6,780 were export models, of which only 2,871 went to the United States. Several variants were produced noted only in changes of the production numbering sequences, these have become unofficially designated as "Early" 1970, the Mk I (1971–1972/3), Mk II (1973) and "Late" (1974-1977).

Most cars were fitted with a Borg-Warner 3-speed automatic transmission. The other choice was a derivative of the ancient TR-2 gearbox which had been modified and improved over the years for use in the TR4/A/IRS/TR5/250/6. First gear ratio was raised and needle roller bearings were used in place of the bronze bushings on the layshaft. Early models could be ordered with an A-type Laycock overdrive unit and later ones frequently came with a J-type Laycock unit. The overdrive option is highly desirable as the engine RPM is excessive without it.

Other than the choice of transmissions there were very few factory installed options. Some early cars came with just the soft-top and some with just the hard-top but most ended up with both. Electric windows, power steering and power assisted brakes were standard. Options included air conditioning, luggage rack, Koni shock absorbers, floor mats and Lucas Square Eight fog lamps, and a range of aftermarket products, most of which were dealer installed as optional accessories.

Classic Status

The Triumph Stag is now a fairly desirable classic car, with sizeable club and owner support, a number of specialist suppliers, and reasonably strong prices. About 9,000 Stags are believed to survive in the United Kingdom. The car's popularity is possibly due to its comparative rarity, its unique timeless Michelotti styling, and that, while the car was liable to engine problems, many surviving vehicles are lacking in the rust and electrical problems that beset many British cars of the period. All of the problems associated over the years have been solved by those enthusiast clubs supporting the Stag, elevating this classic to its intended place in popularity envisioned by its designers.

Photos

• 
• 
• 
• 
• 

Popular Culture

In the James Bond movie, Diamonds Are Forever, diamond smuggler Peter Franks drives a Triumph Stag, which James Bond steals when he assumes Franks' identity.

References

• Poole, C. (2004). Genteel Tourer: The Story of the 1970-77 Triumph Stag. Collectible Automobile, October 2004, 52-61.

• Taylor, James (1999). Original Triumph Stag: The Restorers Guide. p.5-15.

• Taylor, James (1992). Triumph Stag 1970-1977: Choice - Purchase - Performance - #4; Essential Advice & Data for Buyers & Enthusiasts. p. 6-12.

• Triumph Service Division, Coventry England. (1969). Triumph British Leyland Preliminary Service Information - STAG, Part Number 545160

• Standard - Triumph Sales Limited (1969). British Leyland Triumph, Triumph Stag Graphic Catalogue, Graphic Publication no. 519579