Rolls-Royce Phantom VI

Rolls-Royce Phantom VI
Manufacturer	Rolls-Royce
aka
Production
Class
Body style
Length
Width
Height
Wheelbase
Weight
Transmission
Engine
Power
Similar
Designer

The Phantom VI was an ultra-exclusive Rolls-Royce model from the 1970s and 1980s produced in London at Mulliner Park Ward. It was made from 1968-1991.

Though it had been expressed that the days of motor cars of the like of the Rolls-Royce Phantom V were undoubtedly numbered, in 1968 Rolls-Royce launched the Phantom VI as a logical progression keeping up the high standards set in the past. The Phantom VI had a re-styled facia and was powered by an engine developed from that of the current Rolls-Royce Silver Shadow. An increase in capacity to 6,750 cc in 1979 was coupled with the introduction of a 3-speed automatic transmission instead of the previously employed 4-speed automatic gearbox. This last specimen of a passenger motor car with separate chassis produced by Rolls-Royce was offered until 1991. The chassis used coil springing all round and the car used drum brakes.

Most of the bodies were by Mulliner Park Ward usually limousines but a few landaulettes were also made.

Engine

The Phantom had a 90 degree V8 with a capacity of 6,230 cc with a bore of 104 mm and stroke of 91.5 mm. This was raised in 1982 to 6,750 cc by fitting the engine from the Rolls-Royce Silver Spirit. Twin SU carburettors were fitted. The car had a 4-speed automatic gearbox (from 1979 a 3-speed automatic gearbox with torque converter became standard).

When production ended 374 had been made.

This article about a car produced between 1945 and 1975 is a stub. You can help Wikicars by expanding it.