.

Ford Super Duty engine

Wikicars, a place to share your automotive knowledge
Revision as of 07:52, 10 July 2010 by Red marquis (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
place image here in 300 pixels
Engine Name
Engine
Manufacturer Ford Motor Company
aka Type aka here, not up there
Type Petrol
Production/Introduction 1958–1981
Status Discontinued
Displacement in litres, cc's or cu-in.
Aspiration write its type of aspiration
Configuration V
Cylinders 8
Fuel System write if it is injected or carburated and the system used
Lubrification indicate the engine's type of lubrification
Output N/A hp @ N/A rpm
N/A lb-ft. of torque @ N/A rpm
Bore in inches
Stroke in inches
Compression write compression ratio here
In. Valves in inches
Ex. Valves in inches
Firing Order Firing order of cylinders
Left Bank Write which cylinders are in this bank (write N/A if it it is inline)
Right Bank (same as above)
Length in inches
Diameter in inches
Width in inches
Height in inches
Dry Weight lbs. / kg.
Fuel Consumption city/highway (mpg & km/L)
Emission/s CO: g/km
CO2: g/km
NOx: g/km
Hydrocarbon: g/km
Particulate: g/km
Chief Engineer write here

The Ford Super Duty engine was a truck engine from Ford Motor Company.

The Super Duty was introduced in 1958 along with the FE and MEL series V8 engines. The Super Duty was available in displacements of 401 cu in (6.6 L), 477 cu in (7.8 L), or 534 cu in (8.8 L). These engines appeared in medium and heavy-duty trucks of the time and were large, heavy, low speed, high torque engines. They were never designed as automobile engines and were commonly found in large, industrial use vehicles including dump trucks, garbage trucks, concrete mixing trucks, and large buses. The Super Duty engine was built in Ford's Cleveland engine plant number 2.

When introduced in 1958, the 401 produced 226 hp (169 kW) at 3800 rpm and 350 lb·ft (475 N·m) of torque at 1800-2300 rpm. The 477 produced 260 hp (194 kW) at 3600 rpm and 430 lb·ft (583 N·m) of torque at 1800-2300 rpm. The 534 produced 277 hp (207 kW) at 3400 rpm and 490 lb·ft (664 N·m) of torque at 1800-2300 rpm. A marine version, commonly referred to as the "Seamaster" was also available starting in the late 1950s. The Seamaster was available with twin turbochargers, and weighed over 1,300 pounds (590 kg) installed.

Photos

Unique Attributes

If there are any features of this vehicle that sets it apart from other vehicles in its class, then mention those unique attributes here.

Criticisms

Please make sure to keep critiques in a third-person point of view. If using criticisms from a reputable automotive source, then please make sure to cite the quote.


Worldwide

If the vehicle is sold in other markets worldwide, then this is the section to mention that information. Also, mention if the <MODEL> goes by another name in these other markets.

Design quirks and oddities

Refer to any pop-culture tidbits about the vehicle in this section.

Awards

List out notable awards that the model has recieved while in production. Boldface the company or orgainization that gives out the award, and Italicize the name of the award.

See Also

External Links